TEQStone 3D Printer Levelling Sensor 3D Touch V3.2 Automatic Levelling Accessories

£18.08

Higher precision: the accuracy deviation of 3D Touch V3.2 is ± 0.005 mm, which allows the tilt of the print surface to be accurately measured and automatically aligned. Significantly improves printing success rate and print accuracy.
Highly compatible: the 3D touch sensor has a new structure design that is suitable for various bed materials such as glass, wood, metal, etc. suitable.
【2 Wiring】TEQStone 3D Touch V3.2 comes with 2 cables of different lengths that can easily meet the different requirements for the wiring distance of the 3D printers and sensors.

Category:

Description

TEQStone 3D touch V3.2 can realise the automatic levelling of FDM 3D printers. It has been built with the latest technology and can accurately measure the inclination of the bed. It can be used for bed made of glass, wood, metal, etc. Users no longer need to manually level the bed. This can help you achieve a first level of print with higher quality and improve your printing experience.

Feature:
Intelligence.
Simple structure.
Self-testing.
Annormal alarm.
Wide selection of bed
High precision (+ – 0.005 mm).
Automatic detection after switching on.

Specifications:
Voltage: 4.8 ~ 5.1 V.
Current: 15mA ~ 300mA

Content:
1. 3D touch: x1.
2. M3 Screw: x4
3. M3 nut: x2.
4. Metal holder: x1.
5. 18 cm cable: x1.
6. 100 cm cable: x1.

Wiring.
3-pin: brown (-, GND), red (+ 5V), orange (control signal).
2-pin: black (-, GND), white (Z min)

Operating condition:
3DTouch can be operated under the following conditions.
An E / A for control (PWM or software PWM).
One E / A for Zmin (Z probe).
GND and + 5 V power.

Caution:
In case your board does not supply enough power, an additional power supply is required.
Do not remove or deform elastic material attached to the pressure pen.
After assembling or adjusting the core, attach the pressure pin with lock colour.
By pulling hard / pressing the pressure pen, 3DTouch can be damaged and made less accurate.
Electronic devices can be damaged or even destroyed when connected to a wrong polarity. [Connect wrong terminal to 5V (+) and GND (-)]

Higher precision: the accuracy deviation of 3D Touch V3.2 is ± 0.005 mm, which allows the tilt of the print surface to be accurately measured and automatically aligned. Significantly improves printing success rate and print accuracy.
Highly compatible: the 3D touch sensor has a new structure design that is suitable for various bed materials such as glass, wood, metal, etc. suitable.
【2 Wiring】TEQStone 3D Touch V3.2 comes with 2 cables of different lengths that can easily meet the different requirements for the wiring distance of the 3D printers and sensors.
【Easy and Convenient】With automatic detection after boating, abnormal alarm, intelligent measurement and other functions. It can be widely used in various FDM 3D printers and is a necessary accessory for 3D printers.
More detailed instructions can be found in the instruction manual (English language not guaranteed). If you need help, please feel free to contact us.

Additional information

Brand

Reviews

There are no reviews yet.

Be the first to review “TEQStone 3D Printer Levelling Sensor 3D Touch V3.2 Automatic Levelling Accessories”

Your email address will not be published. Required fields are marked *