* The cable length is 1000mm.
Package including 3pcs of 17HS13-0404S1
This is the most popular Nema 17 model. It with 1.8 deg. step angle (200 steps/revolution).
Each phase draws current 0.4A at 12V, allowing for a holding torque of 26Ncm(36.8oz.in). The motors are supplied with a 1 metre long power cable with a 4-pin Harwin female connector already fitted – ready to plug and print!
* Manufacturer Part Number: 17HS13-0404S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 26Ncm(36.8oz.in)
* Rated Current/phase: 0.4A
* Phase Resistance: 30ohms
* Inductance: 37mH+/-20%(1KHz)
* Frame Size: 42 x 42mm
* Body Length: 34mm
* Shaft Diameter: 5mm
* Front Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 1000mm
* Weight: 230g
Black(A+), Green(A-), Red(B+), Blue(B-)
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Package in 3PCS
26Ncm Holding Torque
NEMA 17 bipolar 42x42x34mm 4-wire
Rated Current 0.4A & Voltage 12V