HzdaDeve Flexible Removable Magnetic 3D Printer Build Surface 235 x 235 mm Sticker Heated Duvet with Handle for Creality Ender 3 Ender 3 Pro Ender 5

£13.70

Easy to remove the model: this surface is flexible and models can be easily removed. Simply print on the surface, remove the top magnetic surface from the bottom, bend the flexible surface and watch the model fall right into your hands.
Easy installation: the building surface comes with an upper magnetic building surface and a lower magnetic adhesive surface. Place the bottom 3M adhesive surface on the normal building plate.
Dimensions: 235 x 235 mm (9.25 x 9.25 inches); handle size: 15 x 115 mm (0.59 x 4.52 inches); made of PC and magnetic material.

Category:

Description

HzdaDeve Flexible Removable Magnetic 3D Printer Surface 235 x 235 mm Sticker Heated Duvet with Handle for Reality Ender 3 Ender 3 Pro Ender 5

Technical data:
Material: PLA and magnet
Colour: black.
Size: 235 x 235 mm / 9.25 x 9.25 inches. Handle size: 15 x 115 mm (0.59 x 4.52 inches).
Package weight: approx. 285 g.
Suitable temperature: 80°C – 100°C. Recommend no more than 80°C for long heating.

Use:
Type 1 Clamp the construction surface to the print bed with binder clips (at least 3 clips).
Type 2 Tear off the 3M adhesive tape on the back and stick to the heated bed.

Note: the 3D printing plate with 3M adhesive must be glued to the heating plate. If the magnetic attraction is weak, you need to adjust the alignment to 90 degrees.

Package includes: 1 x magnetic 3D printing build surface sticker.

Easy to remove the model: this surface is flexible and models can be easily removed. Simply print on the surface, remove the top magnetic surface from the bottom, bend the flexible surface and watch the model fall right into your hands.
Easy installation: the building surface comes with an upper magnetic building surface and a lower magnetic adhesive surface. Place the bottom 3M adhesive surface on the normal building plate.
Dimensions: 235 x 235 mm (9.25 x 9.25 inches); handle size: 15 x 115 mm (0.59 x 4.52 inches); made of PC and magnetic material.
Compatibility: it is compatible with PLA, HIPS, PETG etc.
Suitable for Creality Ender 3, Ender 3 Pro, Creality CR-20, Ender 5, Tevo Flash, Geeetech A10 and A10M, Robo R1+ and so on.

Additional information

Brand

Reviews

There are no reviews yet.

Be the first to review “HzdaDeve Flexible Removable Magnetic 3D Printer Build Surface 235 x 235 mm Sticker Heated Duvet with Handle for Creality Ender 3 Ender 3 Pro Ender 5”

Your email address will not be published. Required fields are marked *