GCB-1 is a machine developed for the secondary curing process of post-sla printed models. Models that are in this process are mostly obtained an optimal appearance and function.
Please make sure the printed model has been washed in advance. Otherwise, the secondary curing process will result in a pale finish of the finished model.
Power consumption: DC 12 V.
Power supply: Input: AC 100-240V, 50~60Hz, Output: 12V
UV lamp wavelength: 405 nm.
Speed: 7 rpm.
Curing size: Φ185 mm × 180 mm.
Product size: 217 (L) × 204 (W) × 228 (H) mm
Package size: 295 (L) × 270 (W) × 120 (H) mm
Product weight: ~ 1.3 kg.
Package weight: ~ 1.72 kg.
1. 1 x control panel.
2. 1 x user manual (English language not guaranteed).
3. 1 x customer service card.
4. 1 x power supply.
5. Screw x 8 (two different types).
6. Nuts x 6.
7. 1 x screwdriver.
8. 1 x lever.
9. Elastic band x 20.
10. 6 x acrylic plate units
Quick embly structural design: With acrylic plates as main embly parts, it can be easily assembled and removed. The machine supports the second rescue function of SLA models.
Timing setting: Wide range of timing setting: 1 60 minutes. With the machine, you can set the timing in a wide range. Once the time has elapsed, UV lamps and motor are automatically switched off.
Even rotation with 360° rotating tray: With 7 rounds per minute that executes the tray, this reading box does not leave a dead angle, giving the machined models a much smoother and even smoother appearance.
Intelligent protection: The machine stops automatically when the box is opened, whereby the UV lamp beads and the motor are immediately switched off and the timing no longer heels. Once the box is closed again, it will work again.
Custom lamp plate that covers the entire box: Equipped with six UV lamps, the output box with a light output of 220 W/m² will perform a much more effective focusing process.