Input Power:12 VDC
Maximum Print Speed:75mm/sec
Layer Thickness:0.1-0.3 mm
Display Type:3.3″ touch screen
Maximum Extruder Temperature:250 Celsius degrees
Maximum Build Plate Temperature:80 Celsius degrees
Build Plate:Heated removable aluminum
Connectivity: Wi-Fi, microSD card, USB
Offline Printing:Yes, with microSD card
Supported Software:Cura, Repetier Host, etc.
AC Adapter Input Power:100-240 VAC, 50/60 Hz
Supported Materials:ABS, PLA, PETG, wood, copper fill, steel fill, bronze fill, and other materials
Safety Warnings & Guidelines
Do not remove the insulating tape on the extruder nozzle
Keep the printer and all accessories out of reach of children
Always allow the printer and extruded filament to cool before reaching inside
Do not remove or disconnect the USB cable when printing from a computer
Ensure that the printer is turned off and unplugged from its power source before
Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity
Use only in a well-ventilated area. Do not use in close, confined spaces.Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the device
Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately unplug it from the power outlet and allow it to fully dry before reapplying power
1x 3D printer
1x Filament rack
1x Plastic scraper
1x USB cable
1x MicroSD card
1x Hex wrench
1x Power adapter
1x AC power cord
1. Printing Size: 150*150*150mm. The heated build plate and wide range of extruder temperatures allow this printer to work with most types of 1.75mm 3D filaments.
2. LCD Touch Screen: Touch screen interface, simply navigate through the easy to use touch screen to level the print bed, select the part you want to print, and let the printer transfer your designs into reality. This printer is easy to setup and easy to use. Online and offline service to support you get your dream product.
3. Outstanding Performance: This printer features a single extruder, which is capable of printing in PLA, ABS, Wood, Copper Fill, Steel Fill, Bronze Fill, and other materials. MicroSD card with preinstalled models, you can start printing easily after you received.
4. All Metal Hotend for Stability: The all metal hotend is capable of superior performance and prevents wear and tear, while the heat brake design allows for efficient dissipation of heat. The sturdy metal base and side filament holder make it easy to use and change the filament.
5. Removable Magnetic Build Plate: The easy to remove magnetic build plate makes the often times messy and difficult removal of prints simple and straightforward. Flexible magnetic print sheet, automatic calibration with wifi connected. You can print from a Windows or Mac PC using a USB connection or can print from 3D model files stored on a microSD card, without the need for a PC connection of any kind.